Search found 49 matches

by CalS201
Tue May 26, 2015 12:48 pm
Forum: Broadcasts and Conferences
Topic: Hiding the sleeping choir members
Replies: 10
Views: 4354

Re: Hiding the sleeping choir members

For our next stake conference we are placing a camera on the back pew, just a little higher than the head of a seated person, which will completely remove all choir members from view when a speaker is at the pulpit. A second camera will be mounted 7 feet high in the corner of the overflow area which...
by CalS201
Mon Jan 05, 2015 11:17 pm
Forum: Broadcasts and Conferences
Topic: EVI-D70 phoenix question
Replies: 1
Views: 1103

Re: EVI-D70 phoenix question

Screws are down (on bottom). Pin #1 is on leftside.
by CalS201
Sun Jun 01, 2014 8:13 pm
Forum: Webcasting
Topic: Webcast upload bandwidth requirements
Replies: 2
Views: 1154

Webcast upload bandwidth requirements

Over the last couple of years, we have originated stake conference webcasts from 3 of our 4 bldgs with good success. We avoid the 4th bldg because the U-Verse internet connection is only 6mbps down/.94mbps up rate (measured on several occasions). Recently we did a 1.5hr test webcast from the 4th bld...
by CalS201
Fri Jan 17, 2014 5:05 pm
Forum: Webcasting
Topic: Stake Conference Broadcasts - Rotating Buildings/Streaming
Replies: 8
Views: 1856

Re: Stake Conference Broadcasts - Rotating Buildings/Streami

We purchased a "Composite Video AV Adapter" (typically $15-$35) for the iPad which we use to connect the iPad to input #4 of the 4 input video mixer. With the iPad app "GoodReader" (which supports the "Composite Video AV adapter"), we loaded a landscape oriented TXT fil...
by CalS201
Fri Dec 13, 2013 10:27 am
Forum: Webcasting
Topic: Stake Conference Broadcasts - Rotating Buildings/Streaming
Replies: 8
Views: 1856

Re: Stake Conference Broadcasts - Rotating Buildings/Streami

We use a DataVideo SE-500 Video Switcher for mixing and the Osprey 230 card for encoding. The video also connects to the bldg's "camera input" located in the overflow area-which gets the video signal into several overflow rooms as well as the pulpit area for our choir and speaker monitors....
by CalS201
Thu Dec 12, 2013 4:58 pm
Forum: Webcasting
Topic: Stake Conference Broadcasts - Rotating Buildings/Streaming
Replies: 8
Views: 1856

Re: Stake Conference Broadcasts - Rotating Buildings/Streami

We have broadcast from 3 different bldgs with good results. Where possible we prewired the bldg for 3 cameras using CAT5 for power, video, IR, and RS232 which allowed us to operate out of the satellite equip room. In one bldg we had to setup our control booth in the chapel overflow area. Attached is...
by CalS201
Mon Feb 11, 2013 1:46 pm
Forum: Rich Media in Lessons and Training
Topic: Suggested TV's to support USB mp4 files
Replies: 27
Views: 16407

Re: Suggested TV's to support USB mp4 files

We have used the LG 24" LED HDTV Model 24MA31D-PU and the LG BP220 BluRay player. Both have USB playback and operate in a similar manner.
by CalS201
Tue Aug 21, 2012 9:47 am
Forum: Webcasting
Topic: Webcast to multiple rooms in a building
Replies: 39
Views: 4286

We tried several VGA to Composite converters and settled on the "StarTech VGA2VID" unit. It had the best picture quality of the units we tested. Getting the signal to various unwired rooms is not too difficult if the rooms have windows. Just temporarily run RG6 coax along the outside of the bldg. At...
by CalS201
Thu May 19, 2011 12:38 pm
Forum: MLS Support, Help, and Feedback
Topic: MLS Financial Reports cannot be printed using duplexing
Replies: 2
Views: 631

Duplex printing can be done easily by setting up (ADD PRINTER in Windows ControlPanel) a second print driver for your printer whose properties are set for duplexing. Then, by renaming your first print driver to something like "HPLJ-SingleSided" and naming the second print driver "HPLJ-DoubleSided", ...

Go to advanced search