Search found 44 matches

by john84601
Mon Apr 30, 2012 1:54 am
Forum: Clerk Computers
Topic: Time sync on Windows 7 machines
Replies: 7
Views: 1147

Does the Windows 7 NTP client (I think they call it 'Internet Time') not work?
by john84601
Sat Apr 28, 2012 1:47 pm
Forum: Stake Technology Specialist Training
Topic: Physical Building Access / Keys
Replies: 10
Views: 4455

Can you see why the FM Group isn't likely to hand out keys to the rack? Sure... but in my buildings the Audio and the Satellite Receiver cabinets are completely locked. There is no access to anything. I couldn't even tell you if all the right "lights" were on. All I can do is sit and look a...
by john84601
Sat Apr 28, 2012 9:20 am
Forum: Stake Technology Specialist Training
Topic: Physical Building Access / Keys
Replies: 10
Views: 4455

Typically the audio and sound system cabinets are handled by a contractor. Normally, you wouldn't have a key to get inside. Just the operator's position of the satellite rack. But even the directions for integrating the Webcasting box require you to install a 'Y' cable in the back of the Audio syst...
by john84601
Sun Apr 22, 2012 11:41 pm
Forum: Stake Technology Specialist Training
Topic: Physical Building Access / Keys
Replies: 10
Views: 4455

Physical Building Access / Keys

Still fairly new at this STS thing. My question is about building access / keys. What access (keys) does the 'typical' STS have? Taking the duties described in the Wiki literally... I would assume that I would need access to the following. ⋅  Clerks Offices. ⋅  S...
by john84601
Sun Apr 15, 2012 2:23 pm
Forum: Meetinghouse Internet
Topic: Wifi Network in Ward Building
Replies: 6
Views: 1058

Could have something to do with the DHCP lease time. If it's set to something high (i.e. 7 days), then all of the addresses could have been grabed previously in the week (i.e. the night before during a stake dance, etc.?)? In a transient environment... I would set the lease time to something short (...
by john84601
Tue Apr 10, 2012 10:05 am
Forum: Meetinghouse Internet
Topic: Cisco 881 Stops Broadcasting?
Replies: 5
Views: 1015

pingsteve wrote: ...should I look to see if they're broadcasting on the same channel?


They should for sure be on different channels. Although... I don't think that would cause a WAP to stop working. It could be indicitive that they are not talking to the wireless LAN controller.

Did you reboot the 881?
by john84601
Sat Mar 24, 2012 8:13 pm
Forum: Meetinghouse Internet
Topic: Unreliable wireless connections
Replies: 8
Views: 1314

The access via LDS account login sounds good, but I am also concerned about not being able to shut off the wireless access during a stake conference webcast. You could do it the old fashioned way... and unplug them during Stake Conference. We're trying to get new equipment approved by the FM group....
by john84601
Fri Mar 23, 2012 7:41 pm
Forum: Meetinghouse Internet
Topic: Member access to WIFI in church building
Replies: 24
Views: 31106

THEN Once upon a time... church buildings use to use 'residential' type locks. The keys for these locks could be (and often were) copied at any hardware store. Although some member’s willingness to allow their keys to be copied was 'disappointing', I wouldn't quite...
by john84601
Thu Mar 22, 2012 1:10 pm
Forum: Webcasting
Topic: What to use for Stake Conference Video Broadcast??
Replies: 25
Views: 3696

JohnShaw wrote:One additional point might be good as well. Frankly, if you don't use a wired connection to upload and download the broadcast, you are just begging for issues.


I don't know if anyone is trying this over wireless... but let's not forget...
WiFi is 1) shared bandwidth and 2) half duplex.

:0
by john84601
Mon Mar 19, 2012 7:59 am
Forum: Meetinghouse Internet
Topic: Wireless Repeaters and/or powerline options?
Replies: 12
Views: 2408

RussellHltn wrote:I'm not sure about that. I don't think you can mix "lethal" wires with "non-lethal" in a conduit. So you'd be limited to telephone, CCTV and similar.

When you say "lethal" and "non-lethal"... were you refering to high and low voltage? Or something else like, plenum and non-plenum? Just curious...

Go to advanced search