Search found 20 matches

by kwillisjr
Tue Sep 25, 2012 6:05 pm
Forum: Non-Interactive Webcasting
Topic: Audio pin out needed
Replies: 9
Views: 1452

I think I have an idea

I did an internet search for information on the pin out of an xlr to stereo mini connector. Given that the output of our building's sound mixer is a balanced mono feed, I think the thing I need to do is connect the audio cable in the sound closet as follows: red - positive, black - negative, drain -...
by kwillisjr
Tue Sep 25, 2012 5:06 pm
Forum: Non-Interactive Webcasting
Topic: Audio pin out needed
Replies: 9
Views: 1452

Technical spec's

Are there no technical specifications available for the communicator? I'm a little surprised that this information is not obtainable.
by kwillisjr
Tue Sep 25, 2012 9:01 am
Forum: Non-Interactive Webcasting
Topic: Audio pin out needed
Replies: 9
Views: 1452

Audio pin out needed

I think I may have discovered the root cause of our audio hum problem. I see that there was an XLR to 1/8" mini adapter included in the original communicator kit. I'm not sure what happened to it but I've never seen it. We (I) have been trying to adapt from an XLR line level output to what I thought...
by kwillisjr
Tue Sep 18, 2012 12:27 pm
Forum: Non-Interactive Webcasting
Topic: Hum problem solved
Replies: 2
Views: 339

Hum problem solved

Last week, I posted a message about problems we had with a webcast. Since then I was able to resolve all of the problems except the hum in the audio. I finally was able to determine the fix today. I attached the drain wire from the ground of the house sound mixer to the shield of the RCA connector a...
by kwillisjr
Thu Sep 13, 2012 1:33 pm
Forum: Non-Interactive Webcasting
Topic: Can I split the output of the podium mic?
Replies: 16
Views: 3096

And after more testing

I discovered that the audio problems began after the webcast has been running for about 30 minutes. I shut down the webcast, adjusted the audio output level in the communicator setup menu, and re-started the webcast. This seems to have solved this issue for now. I now have a hum issue I will be trac...
by kwillisjr
Wed Sep 12, 2012 5:19 am
Forum: Non-Interactive Webcasting
Topic: Can I split the output of the podium mic?
Replies: 16
Views: 3096

Possible solution - or - what I'd like

I'd like to use a line level mixer that utilizes a balanced input and gives an option for an unbalanced output. I'd also like it to have meters so that we can adjust sound levels 'on the fly' during a broadcast. I'd like it to be small with only one or two inputs. Inexpensive would be nice as well. ...
by kwillisjr
Tue Sep 11, 2012 8:50 pm
Forum: Non-Interactive Webcasting
Topic: Can I split the output of the podium mic?
Replies: 16
Views: 3096

Yes, the outputs are balanced. The model number is Ivie 1026 (not Live 26).
by kwillisjr
Tue Sep 11, 2012 8:42 pm
Forum: Non-Interactive Webcasting
Topic: Can I split the output of the podium mic?
Replies: 16
Views: 3096

Balanced or unbalanced?

I'm thinking this is probably a blanced output. I see that the church online store has an adapter just for adapting from XLR to 1/8". According to the store website, this should have been included with the communicator. Who knows where that might be now. I'm going to see if I can find any informatio...
by kwillisjr
Tue Sep 11, 2012 6:05 pm
Forum: Non-Interactive Webcasting
Topic: Can I split the output of the podium mic?
Replies: 16
Views: 3096

Update

I started the process tonight of trying to isolate the problem we experienced with our webcast this past Sunday. Here is what I found: Ran the webcast communicator in the test mode and the only audio issue I had was some hum that I think is a ground loop (more on that in a minute). I tried to run a ...
by kwillisjr
Mon Sep 10, 2012 8:11 pm
Forum: Non-Interactive Webcasting
Topic: Can I split the output of the podium mic?
Replies: 16
Views: 3096

Can I split the output of the podium mic?

We just had a failed webcast this past Sunday (yesterday). The problem sounded like way overmodulated audio. I have not yet had the time to try to figure out where and / or why the problem existed but I'm wondering if it is possible to split the signal at the mic input under the podium and bypass th...

Go to advanced search