Cannot get laptop to Detect Display

Using the Church Webcasting System, YouTube, etc. Including cameras and mixers.
Posts: 414
Joined: Sun May 10, 2009 3:44 pm
Location: Gilbert, AZ USA

Cannot get laptop to Detect Display

Postby michaelfish » Mon May 11, 2009 8:43 am

When using a laptop to feed both VGA for a projector and S-Video for RF video distribution, I have found some laptops do not detect the S-Video port, even when we try forcing the detection.

This is very frustrating when the meeting is ready to start…ALWAYS test your equipment beforehand and work out the bugs!

Here is a suggestion which I have found helpful. Connect the S-Video cable (with or without the composite video balun) into a device that has regular video inputs such as a Projector, TV monitor, DVD player, VCR, etc. Then re-attempt to detect your display. It may work. If it does, you should be able to unplug the cable and reconnect it to the RF amplifier.

Many video RF amplifiers are not recognized by the laptop because they may not have the correct resistance.


User avatar
New Member
Posts: 41
Joined: Fri Jan 09, 2009 9:59 am
Location: Provo, Utah

Postby Enigma1-p40 » Wed May 13, 2009 6:50 am

with the s-video connection make sure you plug it all in BEFORE you turn on your laptop. that way it can get detected as the laptop is booting.

Return to “Non-Interactive Webcasting”

Who is online

Users browsing this forum: No registered users and 1 guest