My local FM Group has informed me that the church is changing out the old Cisco 1041N APs for Merakis.
Hopefully, this will be plug and play as far as the mounting bracket goes.
Out with the Cisco APs, in with the Meraki
-
- Community Administrator
- Posts: 34487
- Joined: Sat Jan 20, 2007 2:53 pm
- Location: U.S.
Out with the Cisco APs, in with the Meraki
Have you searched the Help Center? Try doing a Google search and adding "site:churchofjesuschrist.org/help" to the search criteria.
So we can better help you, please edit your Profile to include your general location.
So we can better help you, please edit your Profile to include your general location.
-
- New Member
- Posts: 19
- Joined: Wed May 31, 2017 11:02 am
Re: Out with the Cisco APs, in with the Meraki
Unfortunately, no. The new Meraki units are rectangular, so you must use the new mounting hardware. They are relatively simple to activate, though.
Just make sure to take a picture of the serial number or have a laptop/phone handy to enter the serial number into TM to activate, otherwise you'll have to get back up there and get it (I know from experience. I had to locate a new unit the previous tech had installed in the drop ceiling, but never activated.)
Just make sure to take a picture of the serial number or have a laptop/phone handy to enter the serial number into TM to activate, otherwise you'll have to get back up there and get it (I know from experience. I had to locate a new unit the previous tech had installed in the drop ceiling, but never activated.)