https://www.churchofjesuschrist.org/hel ... m?lang=eng
Registering Devices in Technology Manager - Step by Step Checklist
The splash page will only be presented to users that are connected to the Meraki wireless access points. Some facilities have old Church approved Cisco or other non-approved access points installed in their buildings. These devices will not display the splash page and should be replaced with the Meraki access points. The old Church approved Cisco access points (models 1041 and 702) will no longer be supported after March 1, 2020.
Registering A Device in Technology Manager
Step 1: Identify the device that must connect wirelessly to the internet through to the network and does not support a “click-through” to the splash page. In the device Wi-Fi Settings, “forget” the LDSAccess network.
Step 2: Connect the device to the Liahona wireless network (Password: alma3738).
Step 3: Collect the device MAC address. If you have questions, please consult the device’s user manual or search the internet for information related to locating the MAC address for a specific device. The Global Service Department (GSD) will be unable to assist in finding device MAC addresses.
Step 4: Sign into Technology Manager (tm.ChurchofJesusChrist.org) using your Church account.
Step 5: Select the building/property the device needs to be registered at by clicking the firewall serial number associated to the property.
Step 6: Once the Firewall Details screen is displayed, Click the vertical-ellipses icon on the far right side of the screen. Then select “Group Policy Manager.”
Step 7: In the “Find A Device” section of Group Policy Manger, use the “MAC Address” drop-down menu to select the device you wish to register.
Note: Devices need to be connected to Liahona for several minutes before they will display in the dropdown. Only devices connected to Liahona will display in the dropdown.
Step 8: Add a descriptive device name under “Name” that will help identify the device in the future.
Step 9: Select “NoSplash” from Group Policy dropdown.
Step 10: Click “Save.” Devices successfully added to the group policy will immediately appear on the page with the information entered. Test the device to ensure it is working properly on the Liahona network. Note: It will take several minutes after applying the group policy before the device will begin bypassing the splash page.