Meeting House CCTV placement
-
aonu
- New Member
- Posts: 9
- Joined: Mon Apr 25, 2022 5:22 am
Meeting House CCTV placement
Hi everyone l wanted to ask which switch port do l place the Ethernet cable to and on CNN what type do l configure
-
dave.swartz
- Member
- Posts: 96
- Joined: Wed Apr 01, 2020 8:07 am
Re: Meeting House CCTV placement
My un authoritative opinion is that if this is a stake provided camera and you would like to connect to it then Public VLAN. Choose an available switch port and in CNM make sure that port is configured for the Public VLAN.
The Facility VLAN is for FMG /MHT provided stuff so that MHT can manage it remotely. This is not the VLAN for you.
As many have voiced numerous times, when in doubt have your STS or High Council PFR rep work with your facilities manager to get the official word.
The Facility VLAN is for FMG /MHT provided stuff so that MHT can manage it remotely. This is not the VLAN for you.
As many have voiced numerous times, when in doubt have your STS or High Council PFR rep work with your facilities manager to get the official word.
-
russellhltn
- Community Administrator
- Posts: 34518
- Joined: Sat Jan 20, 2007 2:53 pm
- Location: U.S.
Re: Meeting House CCTV placement
That's shown as "iot" in the choices.dave.swartz wrote: ↑Sat Feb 03, 2024 10:57 pm The Facility VLAN is for FMG /MHT provided stuff so that MHT can manage it remotely. This is not the VLAN for you.
And clearly, the camera is not an Access Point (AP), nor another managed switch (Link). So there isn't any good options besides "Public".
Have you searched the Help Center? Try doing a Google search and adding "site:churchofjesuschrist.org/help" to the search criteria.
So we can better help you, please edit your Profile to include your general location.
So we can better help you, please edit your Profile to include your general location.