Reimaged clerk computer. But asks for unknown email/password at login

[Mikerowaved]

...I do everything else at home.

Same here. Makes it real easy with the SFF to dedicate a card table to all of them, then (lacking a good KVM switch), move the monitor/mouse/keyboard cables from one PC to the next for each step. Some steps take a LOT longer than others (e.g., Microsoft updates), so I often leave them overnight. The advantage is I can work on them in parallel at my leisure.

Be sure to attach a sticky note to each one stating which unit it's configured for.

[seneci]

cuando se va instalar windows 11 en el punto de configuracion nos pide que nos conectenmos a intermet, yo hago el procedimiento siguiente: presion la techa shift + f10
me parece una venta emergente, tipeo el siguiente comando oobe\bypassnro. la realizar este comando se reinicia la pcs y vuelve a pedir los procesos de instalacion de usuario y contraseña para que termine la configuracion del windows 11
y luego hago los procesos de la iglesia como esta en la pagina

[KeithCunningham]

Can I do the set up from my home, then take the computer to the clerks office and finish the set up there?

The only thing I do at the clerks office is hook up the computer, attach a printer (unless the clerk beats me to it), and make sure they can access the Internet. I do everything else at home.

Awesome - Thanks!

[KeithCunningham]

I got stuck at a login part when I re-imaged a clerk's computer. I'm not sure what to do next.

I did it by adapting the instructions here: https://tech.churchofjesuschrist.org/wi ... _Computers. Since we're on Windows 11 now, I used the middle link here: https://www.microsoft.com/en-us/softwar ... /windows11 to create installation media. Created a USB drive, changed the computer's boot order, and reinstalled Windows. I saw the church's provisioning stuff kick in. Then it rebooted, sent me to a screen asking for an email and password to log into Windows. But I don't know the username and password. I tried to reset it, but it asked for a reset USB drive which I also didn't have. I tried reinstalling three times just to see if I missed something, same issue.

I also tried the last link in the Windows 11 process where I get a straight ISO image. The problem there was the computer uses Intel RST drivers which are required for the windows installation to proceed, and the intel RST driver self extractor crashes and won't extract those drivers. The Lenovo drivers for this PC appeared to not be for Windows installation.

I'm kind of stuck what to do. Is there a default username and password when I reinstall Windows using the Windows Installation Media approach?

Hello - Setting up a Think Centre for the first time. was purchased some years ago, during the pandemic, but following the instructions at

https://tech.churchofjesuschrist.org/wi ... k_Computer

However, at step 6 things don't go the way as outlined. I do Step 6A - keyboard, region, etc, then it says in 6B, when prompted to sign into windows, select one thing for windows 10 (Domain Join Instead) in lower left (not there) and another step for windoews 11 (Also not there). The thing is, neither option is displayed. I can only enter and email and a password. I don't have a email or password for this new clerk computer.

Hoping someone can help me figure out what I need to do next.

Thanks for your help and time. It is appreciated.