Setting up zoom camera audio (old building)
-
- New Member
- Posts: 8
- Joined: Sun Aug 10, 2014 8:19 pm
Re: Setting up zoom camera audio (old building)
With the listen brand receivers you can leave them plugged in and it should work. Another option is to just clip a wired lapel mic to the pulpit mic, that way you don't have to worry about the batteries to the LIsten receiver failing. You can also purchase an FM radio that is powered by USB that can pickup lower frequency FM (70mhz and up) to plug into the system.
-
- Member
- Posts: 115
- Joined: Wed Apr 01, 2020 8:07 am
Re: Setting up zoom camera audio (old building)
Just saw your note. I will post instructions once I get to Stake Center with computer. Programming cable is simple USB-A to USB micro. Software to program can be downloaded from Listen web site and loaded on PC. I think it can also be powered via usb, but I will need to confirm. Once you have the software working it is literally a check box.
We just finished Stake Conference and I had reprogrammed our receivers for 5 frequencies. Spanish, Korean, Samoan, Chapel English, and Children’s meeting room English.
It is critical to follow recommended frequencies from Williams to avoid overlap and interference.
We just finished Stake Conference and I had reprogrammed our receivers for 5 frequencies. Spanish, Korean, Samoan, Chapel English, and Children’s meeting room English.
It is critical to follow recommended frequencies from Williams to avoid overlap and interference.