I've only done this a couple of times myself, but it's an easy thing to forget or to not think about the first time:
Our printer requires that blank checks be placed into the paper tray face down. Unfortunately this means that when multiple checks are being printed you can't just take 5 checks out of the box and place them directly into the paper tray-- you have to reverse the order of the checks which means that they're all face down, but the lowest numbered check is on the top of the stack.
I can think of a few solutions:
1) Extra training, or require that each check be hand fed into the printer. (Not something that most somewhat technical people are going to think of when they're trying to print multiple checks.)
2) Somehow get the box of checks ordered in such a way that they're already face down, but with the lowest numbered checks on top.
3) Have MLS print checks in reverse order (should probably be a "system option")
4) Become finance nazi and hide all the checks.
My personal preference is 3, 2, 1, 4.
How have other clerks dealt with this?
printing multiple checks in reverse order?
-
- New Member
- Posts: 45
- Joined: Sun Mar 04, 2007 7:43 pm
-
- Member
- Posts: 56
- Joined: Fri Feb 16, 2007 6:44 pm
- Location: New Zealand
printing checks? that'd be nice!
You probably won't get much sympathy from those of us overseas who still have to write out each check by hand :p
-
- New Member
- Posts: 40
- Joined: Wed Apr 04, 2007 8:24 am
- Location: Salt Lake City, UT
- opee
- Member
- Posts: 338
- Joined: Mon Jun 25, 2007 3:00 am
- Location: Sunnyvale, CA
dwterry wrote:We've always just done ours one at a time. Because of that, I don't even know if our printer has the same issue or not. We stick one check in. We print it. Did it come out right? Yes, move on to the next one.
I agree that this is the safest way, although it may be a little slower. It allows you to stop if a mistake was made and saves time since you don't have to fix the mistake that you made by trying to get done faster...
-
- Community Administrator
- Posts: 34513
- Joined: Sat Jan 20, 2007 2:53 pm
- Location: U.S.
-
- New Member
- Posts: 45
- Joined: Sun Mar 04, 2007 7:43 pm
Boy, you guys are no fun.
Redzarf, you definitely have my condolences. I was the financial clerk for about 2-3 months before we switched to MLS, and the amount of time I had to spend on reconciling and balancing stuff dropped tremendously. I went from needing to spend 2 hours/month to about 10-15 minutes. (As long as I don't have problems with how checks are printed!)
Redzarf, you definitely have my condolences. I was the financial clerk for about 2-3 months before we switched to MLS, and the amount of time I had to spend on reconciling and balancing stuff dropped tremendously. I went from needing to spend 2 hours/month to about 10-15 minutes. (As long as I don't have problems with how checks are printed!)