LCR cutom report drops columns

Discuss where to obtain or how to fill out specific reports or forms.
New Member
Posts: 18
Joined: Sun Feb 26, 2012 7:43 pm

LCR cutom report drops columns

Postby EbenVisher » Fri May 03, 2019 6:24 pm

For me, LCR only prints as many columns to the PDF as will fit on the width of one page. So if I choose, say, 20 columns, I get a report with only the first 10 or so.

I expected it to act like Excel, and print one set of pages for each column range.

It cannot actually be designed this way, so what am I missing? As I understand the current behavior, I can never make a custom report with more than a small number of columns (under 10 or so).

Thanks *so* much for your help. :-)

Senior Member
Posts: 1247
Joined: Sun May 09, 2010 8:16 pm
Location: Oklahoma, USA

Re: LCR cutom report drops columns

Postby davesudweeks » Fri May 03, 2019 7:30 pm

I just generated a report with 14 columns. All the columns show whether I print portrait or landscape.
Then I took it to 20 columns and it truncated at 14 columns when printing portrait but all 20 columns showed when printing landscape.

With all due respect, I'm wondering what use there would be for that many bits of information on a single report. Then, of course, all my custom reports have been to answer very specific questions and don't require a large number of columns to provide the information needed.

Return to “Reports and Forms”

Who is online

Users browsing this forum: No registered users and 0 guests