Any suggstions for a stable portable camera mount?

Using the Church Webcasting System, YouTube, etc. Including cameras and mixers.
bradpeterson@gmail.com
Member
Posts: 83
Joined: Sat Jan 12, 2013 6:29 pm

Any suggstions for a stable portable camera mount?

#1

Post by bradpeterson@gmail.com »

That headline suggests "get a tripod", but hear me out. We're ready to implement a permanent solution for our stake, and we've got it all figured out except the camera mount. We're stuck on this. We've got old buildings, so the only permanent solution which works with cords is the chapel's back corner.

My needs:

* Mount a PTZ camera about 150 feet back.
* Put the camera ~7 feet high to see over heads.
* No wobble. At 20x zoom, wobbles easily show up.
* Small footprint, one old chapel has at most a 2x2 foot area on the floor for us to use, that building is cramped with pews.
* Easily bring it in and out of a closet for meetings. The PTZ and software will handle the pan/tilt/zooming.

The easy answer is a simple 8 inch L bracket wall mount. Two bolts in a wall, and I'm done. But FM is adamant that church HQ won't let us do that.

I've considered using a narrow shelf and put the camera mount on top of that. Pull the shelf out of a closet, rest it against a wall, and I'm good. But all such shelving I find online only goes up to ~5 foot height.

Tripods don't seem to work for my needs. They require wide legs to avoid wobble, stable ones cost at least $600, and the tripod will almost certainly get a hard accidental kick by someone in the congregation at some point (I've already lost two cheaper tripods that way.)

Any ideas out there?
Wattsuk
Member
Posts: 79
Joined: Sun Apr 04, 2021 3:53 am

Re: Any suggstions for a stable portable camera mount?

#2

Post by Wattsuk »

We use a microphone stand. It is very stable and has a very small footprint. You can get threaded adapters for whatever camera you are attempting to mount.

It extends to 7 or more feet but we find that high is a bit unnatural for viewers at home. At 5-6 feet high it till sees over the congregation and just is a more natural angle.

One picture of a mevo start mounted directly to mic stand without extendable boom attached and one pic with it attached.

We've since gone to a larger, heavier camera with a 10x zoom and the stand is now at the back left corner of the chapel instead of front and centre.

Not experienced any wobble that I know of but we are careful to keep it well away from any passing feet.
Attachments
IMG_20200908_134007.jpg
(287.5 KiB) Not downloaded yet
IMG_20210512_184440.jpg
(272.15 KiB) Not downloaded yet
bradpeterson@gmail.com
Member
Posts: 83
Joined: Sat Jan 12, 2013 6:29 pm

Re: Any suggstions for a stable portable camera mount?

#3

Post by bradpeterson@gmail.com »

Huh, I hadn't considered microphone stands at all. That's a really good idea.
bradpeterson@gmail.com
Member
Posts: 83
Joined: Sat Jan 12, 2013 6:29 pm

Re: Any suggstions for a stable portable camera mount?

#4

Post by bradpeterson@gmail.com »

This mic stand seems like a great fit:

https://www.bhphotovideo.com/c/product/ ... stand.html

I think this adapter will also do the trick:

https://smile.amazon.com/dp/B013X10T1C/ ... BAZDJRPWMG
Wattsuk
Member
Posts: 79
Joined: Sun Apr 04, 2021 3:53 am

Re: Any suggstions for a stable portable camera mount?

#5

Post by Wattsuk »

Yes, we have those adapters which were needed for the PTZ camera but not for the Mevo camera.

FM group in our area were happy to provide microphone stands but not the required adapters for the camera.

You may want to enquire and see what they can provide for you from their budget.

You may also have plenty of old microphone stands tucked away in a cupboard somewhere in the chapel?
CalS201
Member
Posts: 131
Joined: Fri Jan 28, 2011 3:59 pm
Location: Herriman, UT

Re: Any suggstions for a stable portable camera mount?

#6

Post by CalS201 »

Construct a "J" shaped bracket using 1/2" pipe, wood, or steel strap that can just hang from the soffit.
Camera Hanging from Soffit 500px.JPG
Camera Hanging from Soffit 500px.JPG (93.8 KiB) Viewed 225 times
CalS201
Member
Posts: 131
Joined: Fri Jan 28, 2011 3:59 pm
Location: Herriman, UT

Re: Any suggstions for a stable portable camera mount?

#7

Post by CalS201 »

Construct a "U" shaped bracket using 2X12 lumber and 1/2" pipe. The bracket "floats" around the pew to avoid vibration.
Camera U Bracket in Pew.JPG
Camera U Bracket in Pew.JPG (142.38 KiB) Viewed 222 times


Buy a stone patio umbrella base (35lbs) and insert a 7ft chainlink fence pole. Attach camera shelf using pipe hangers.
Floor mounted Camera Pole.JPG
Floor mounted Camera Pole.JPG (126.58 KiB) Viewed 222 times
autryld
New Member
Posts: 15
Joined: Sat Feb 25, 2012 11:23 am

Re: Any suggstions for a stable portable camera mount?

#8

Post by autryld »

Have you considered using the device for the hard of hearing as an audio input? That's what we use. It includes the organ and all microphone inputs in the chapel. You may need the crab box to patch it to the camera or the PC depending on equipment configuration.

--
Larry Autry
autryld
New Member
Posts: 15
Joined: Sat Feb 25, 2012 11:23 am

Re: Any suggstions for a stable portable camera mount?

#9

Post by autryld »

Our Sony SD camera is permanently mounted at the back corner of the chapel on top of the ledge where fluorescent lights are mounted. The FM group also had the IR control wired back to the satellite closet so I can position the camera most anywhere on the stand - chorister, piano, organ, choir, etc. The audio is also permanently wired to include all audio including the organ. We currently use the VidiU to encode for our webcasts. When we switch to zoom, I believe all we need to do is change the configuration as noted in the image below. The Magewell is a video capture device but I think it's a bit expensive. If you know of a good and less expensive one, please share a link.
SD Video Zoom Webcast.png
--
Larry Autry
russellhltn
Community Administrator
Posts: 31295
Joined: Sat Jan 20, 2007 2:53 pm
Location: U.S.

Re: Any suggstions for a stable portable camera mount?

#10

Post by russellhltn »

autryld wrote: Wed Nov 03, 2021 1:53 pm Have you considered using the device for the hard of hearing as an audio input? That's what we use. It includes the organ and all microphone inputs in the chapel. You may need the crab box to patch it to the camera or the PC depending on equipment configuration.
Depending on the receiver, it may need a load to turn on.

I wouldn't expect the mix for it to be any different than the audio output.

Some have reported it as too noisy.

It certainly an option if a better one isn't available.
Have you searched the Help Center? Try doing a Google search and adding "site:churchofjesuschrist.org/help" to the search criteria.

So we can better help you, please edit your Profile to include your general location.
Post Reply

Return to “Non-Interactive Webcasting”