White Boards

Some discussions just don't fit into a well defined box. Use this forum to discuss general topics and issues revolving around the Church and the technology offerings we use and share.
GemmaGurney
New Member
Posts: 2
Joined: Mon Jul 01, 2024 9:30 am

White Boards

Post by GemmaGurney »

Does anyone know what kind if White boards they are putting in the new churches? Why are my magnets not working? And what kind do work on these boards. They have 4 on them already but sometimes you need more.
rmrichesjr
Community Moderators
Posts: 4230
Joined: Thu Jan 25, 2007 11:32 am
Location: Dundee, Oregon, USA

Re: White Boards

Post by rmrichesjr »

Do the magnets not work at all? Or, are they just weak on those boards?

If the board's backing material is non-ferrous (aluminum, etc.), basically no magnet will stick to it. Let's hope that's not what the new board are.

Worst case, sticky-notes or sticky-note paper should work. Blue painter's tape might also work but might possibly leave residue.
munaish
Member
Posts: 189
Joined: Sun Apr 01, 2012 1:58 pm

Re: White Boards

Post by munaish »

If it's a case of only super strong magnets working, be careful, since they might be dangerous to unsuspecting children and adults who play with them (since they can stick to other things and each other very, very, very well—if they're such as neodymium magnets).
GemmaGurney
New Member
Posts: 2
Joined: Mon Jul 01, 2024 9:30 am

Re: White Boards

Post by GemmaGurney »

rmrichesjr wrote:
> Do the magnets not work at all? Or, are they just weak on those boards?
>
> If the board's backing material is non-ferrous (aluminum, etc.), basically
> no magnet will stick to it. Let's hope that's not what the new board are.
>
> Worst case, sticky-notes or sticky-note paper should work. Blue painter's
> tape might also work but might possibly leave residue.


They do not work at all. I put my regular magnets on with a single sheet of paper and it didnt stick at all.

Return to “General Discussions”