Reducing Hum from Mics/mixer

Using the Church Webcasting System, YouTube, etc. Including cameras and mixers.
Post Reply
stephengrigg
New Member
Posts: 4
Joined: Fri Sep 14, 2012 10:43 pm

Reducing Hum from Mics/mixer

#1

Post by stephengrigg »

I've got a mixer with 5 choir mics (SM81) input to it that produces a slight hum when the mics pick up any noise. The hum will go away once there is no noise for about 10 seconds OR when someone speaks into the podium microphone. It can also continue for some time and isn't always predictable.

Anyone know why the hum goes away when someone speaks into the podium mic? How about getting rid of the hum altogether? I've tried new cables, different microphones, different inputs, a hum reducer inline from the mixer to the mic input, and just about every dial I can find on the mixer to no avail.
russellhltn
Community Administrator
Posts: 32107
Joined: Sat Jan 20, 2007 2:53 pm
Location: U.S.

#2

Post by russellhltn »

What kind of mixer? What are you listening though? Are you feeding the house system? If so, then there's a hum in your choir mic and mixer setup. The sound goes away because the built-in sound system will switch to the podium (and mute the chior mics) by default - either because someone speaks into it or after a time out of no sound on the other inputs.
Have you searched the Help Center? Try doing a Google search and adding "site:churchofjesuschrist.org/help" to the search criteria.

So we can better help you, please edit your Profile to include your general location.
stephengrigg
New Member
Posts: 4
Joined: Fri Sep 14, 2012 10:43 pm

#3

Post by stephengrigg »

All good questions, thanks for the quick response, I'm working on it this morning/afternoon. The mixer is an Alesis S-16. We are listening through the house system, that is what we are feeding it back into.

The mixer accepts the 5 choir mics and the podium mic (from an output that is on stage right) and then feeds it both through the left balanced output to the house system as well as through an aux out through a balun (which eventually makes its way to the other building). I'm not sure if the hum translates into the feed in the other building or not, haven't got that far. I have tried a single mic, any mic (both choir or reg), as well as different house inputs and a variety of cables but can't get the hum to go away.

I'm afraid that during our meeting the hum will be a bit annoying and don't know a good way to prevent it, I may have to rely on the fact that the podium mic stops the hum and much of the meeting will be talking.
russellhltn
Community Administrator
Posts: 32107
Joined: Sat Jan 20, 2007 2:53 pm
Location: U.S.

#4

Post by russellhltn »

I can't find a manual for that mixer. I'd try with just a simple hand mic into the sound system and see what happens. It's possible that's just how the sound system works.

I'm still unclear on just how you have the things wired up. The fact you have a line running to another building makes things ripe for problems.
Have you searched the Help Center? Try doing a Google search and adding "site:churchofjesuschrist.org/help" to the search criteria.

So we can better help you, please edit your Profile to include your general location.
ksolsen
Church Employee
Church Employee
Posts: 115
Joined: Tue May 24, 2011 4:06 pm

#5

Post by ksolsen »

If possible, you may want to try feeding through the EJ-8 "crab" box and use the hum eliminator switch, or a similar piece of equipment. Ground loop hum is one possible source - it comes by having two different points connected to group with differing potential.
Kurt Olsen - Product Manager at Church HQ for Digital Presentation (Personal Video Conferencing, Meetinghouse Webcast, Conference Rooms, Video Conference Endpoints, Meetinghouse Digital Content)
Post Reply

Return to “Non-Interactive Webcasting”