Pulpit HDMI Input and iPad Lightnight / HDMI adapters

For things that just don't fit anywhere else.
Post Reply
andrewjorgensen
New Member
Posts: 18
Joined: Fri Nov 27, 2009 10:24 pm

Pulpit HDMI Input and iPad Lightnight / HDMI adapters

#1

Post by andrewjorgensen »

We've had problems using iPad Lightning to HDMI adapters with the HDMI input at the pulpit. The video drops every few seconds like it's trying to renegotiate. It was especially embarrassing when a Seventy was visiting for a conference and had planned to show a video.

Other devices work fine on that input.

Has anyone run into similar issues and found a solution?
Wattsuk
Member
Posts: 80
Joined: Sun Apr 04, 2021 3:53 am

Re: Pulpit HDMI Input and iPad Lightnight / HDMI adapters

#2

Post by Wattsuk »

Not all systems are created equally. That applies to church buildings as well as lightning to HDMI adapters.

To start with, are you using the official adapter?
andrewjorgensen
New Member
Posts: 18
Joined: Fri Nov 27, 2009 10:24 pm

Re: Pulpit HDMI Input and iPad Lightnight / HDMI adapters

#3

Post by andrewjorgensen »

Yes, they appear to all be using the official Apple adapter, but I will double-check that. It's possible they have convincing knock-offs.
As to the system at the building, if it helps this is a system that was installed around 5-6 years ago if I recall correctly. It's this Extron input on the bottom left of this photo.

Image
Attachments
original_eb64e90c-1cd4-40fc-9534-366b286bec51_PXL_20210918_165725003.jpg
(1.98 MiB) Not downloaded yet
User avatar
Mikerowaved
Community Moderators
Posts: 4400
Joined: Sun Dec 23, 2007 12:56 am
Location: Layton, UT

Re: Pulpit HDMI Input and iPad Lightnight / HDMI adapters

#4

Post by Mikerowaved »

andrewjorgensen wrote: Tue Nov 02, 2021 8:44 am Has anyone run into similar issues and found a solution?
Yes, we've been experiencing a similar issue with our Extron HDMI inputs. Feeding into the pulpit jack can sometimes work, but if you unplug the HDMI cable and plug it back in 10 seconds later, it fails most of the time. The indicator light goes green for a few seconds (indicating a good input), then amber for a few seconds (indicating a bad or missing input). All the while, my notebook PC (with a direct HDMI output) goes nuts as it switches between 1 screen and 2. When it's working, I can select almost any resolution on-the-fly and it instantly locks on. When it fails, it doesn't matter what resolution I select, it won't latch onto anything,

Also tried the HDMI input jack at the rear of the chapel, but can't get anything to work there.

Later today I'll be turning in a trouble ticket in FIR. Our system was installed earlier this year and I believe is still under some sort of warranty.

BTW, are you able to feed audio into the 3.5mm jack on the Extron plate, or do you use the jack in the top-center of your pic?
So we can better help you, please edit your Profile to include your general location.
andrewjorgensen
New Member
Posts: 18
Joined: Fri Nov 27, 2009 10:24 pm

Re: Pulpit HDMI Input and iPad Lightnight / HDMI adapters

#5

Post by andrewjorgensen »

Mikerowaved wrote: Tue Nov 02, 2021 12:58 pm BTW, are you able to feed audio into the 3.5mm jack on the Extron plate, or do you use the jack in the top-center of your pic?
I prefer the jack in the beige top-center plate because it doesn't require switching to the "Media" setting for the chapel and it's easy to adjust the volume quickly if it's too loud or too quiet. But we've used both, and we've even just used HDMI audio (when HDMI works at all).
Mikerowaved wrote: Tue Nov 02, 2021 12:58 pm Later today I'll be turning in a trouble ticket in FIR. Our system was installed earlier this year and I believe is still under some sort of warranty.
Ours is definitely out of warranty, but I've also filed a FIR in hopes that it can be fixed. Please let me know if they are able to solve it!
Post Reply

Return to “Other Meetinghouse Technologies”